When using the Reolink cameras it may become necessary to disable internet access to these cameras. In my findings you must only disable internet access to these devices VIA NAT instead of removing access to the default gateway. If the devices lose their default gateway they will refuse to connect regardless of the NAT policies …
The following is how to disable POE on a single port for a Juniper EX switch. The port we are using is ge-0/0/0. Disable POE on the ge-0/0/0 port set poe interface ge-0/0/0 disable
The following is how to disable POE on all ports for a Juniper EX switch. Disable POE on all ports set poe interface all disable
This post applies to the EX3300 line of Juniper switches. This may apply to more models but may not work. This clears the alarm caused by not having the rear management port connected to the switch. Disable the Managment Alarm. set chassis alarm management-ethernet link-down ignore
The following is a guide on how to set a static IP on a VLAN interface using a Juniper EX3300. This guide assumes you are using the IP of 192.168.88.31/24 and the VLAN of 88. Set the Management VLAN ID set vlans VL88 vlan-id 88 Set the Management VLAN Description set vlans VL88 description MGMT_Network …
Read more “Set Static Management Interface on Juniper EX3300 with VLAN”
The following is a guide on how to change the guest operating systems CPU configuration of CPU cores per socket. This may be useful for software that charges per core or per socket in their licensing fees. Please note that this DOES NOT change any Microsoft licensing requirements. Their licensing is at the host level, …
The following is a quick guide on how to create a new virtual switch and add ports to it. In this example we will be adding only a single port so there will be no redundancy. Navigate to Networking -> Virtual Switches. Click Add Standard Virtual Switch Set the Virtual Switch Name to something familiar. …
Read more “Create New Virtual Switch and Add Ports VmWare ESXi”
The following is a quick guide on how to Tag/Trunk all VLANs coming into a ESXi server for guest use. This will present all VLANs to the guest operating system allowing for it to setup Tagged/Trunked interfaces. Select Add Port Group under Networking -> Port Groups. Setup the new Port Group Name, VLAN ID and …
Read more “Tag/Trunk all VLANs using a Port Group VmWare ESXi”
The following is a quick guide on how to setup a tagged VLAN coming into a ESXi server for guest use. This will present the tagged VLAN as untagged to the guest. In this guide we will be using VLAN65 Select Add Port Group under Networking -> Port Groups. Setup the new Port Group Name, …
Read more “Create a Port Group Using a Tagged VLAN on VmWare ESXi”
The following is how to setup the Juniper DNS client for name resolution. In this example we are using the Google public DNS servers. Enter the following into the CLI using SSH or the console. Set the name servers used. set system name-server 8.8.8.8 set system name-server 8.8.4.4
