Setup Juniper DNS Client

The following is how to setup the Juniper DNS client for name resolution. In this example we are using the Google public DNS servers. Enter the following into the CLI using SSH or the console. Set the name servers used. set system name-server 8.8.8.8 set system name-server 8.8.4.4

Setup Juniper OSPF

The following is how to setup basic OSPF for route sharing in a network. This uses the area of 0.0.0.0 and uses em5 as the interface. Enable OSPF in area 0.0.0.0 on interface em5.0. set protocols ospf area 0.0.0.0 interface em5.0

Juniper Export Static Routes to OSPF

The following is how to export Static Routes to OSPF using Juniper routers and switches. Enter the following in the CLI using the console or SSH. Export static routes using a routing policy specifying static routes. set policy-options policy-statement exportstatic term exportstatic from protocol static Set the routing policy term to accept the routes. set …

Allow Juniper Root SSH Login

The following is how to enable root login via SSH. Enter the following into the CLI using the console or SSH. Enable Root Login VIA SSH set system services ssh root-login allow

How to Set the Juniper Root Password

The following is how to set the Juniper Plain-Text root password. Enter the following into the CLI using console or SSH. Set the Root Plain-Text Password set system root-authentication plain-text-password

Juniper System Login Prompt

The following is how to configure the system login prompt. This prompt shows up when you SSH, Telnet, or Console into a Juniper router or switch. Enter this using the CLI using console or SSH. Set the System Login Prompt set system login message “This is the System Login Message”

Juniper Host Name Setup

The following is a guide on how to set the hostname for a Juniper router or switch. The hostname used in this example is TEST_QFX. Enter the following into the CLI using the console or SSH. Set the Host Name. set system host-name TEST_QFX

Juniper Time Zone Setup

The following is how to set the timezone on a Juniper router or switch. We are using America/Chicago as the example timezone. Enter the following in the CLI via Console or SSH. Set the Time Zone to America/Chicago set system time-zone America/Chicago