Android MikroTik WireGuard Road Warrior Configuration
This configuration assumes you are using MikroTik as your WireGuard server. The Private Key is autogenerated when you install the…
iOS MikroTik WireGuard Road Warrior Configuration
This configuration assumes you are using MikroTik as your WireGuard server. The Private Key is autogenerated when you install the…
MikroTik EOIP Behind a NAT
The following is a description on how to setup an EOIP tunnel with Untagged and Tagged VLANs when one of…
MikroTik L2TP/IPSEC Server with IP Pool Road Warrior
In this example we are creating a L2TP with IPSEC server with dynamic IP Address allocation and a Masqurade SRCNAT…
Enable L2TP/IPSEC Behind a NAT Microsoft Windows 10/11
By default, Windows 10/11 does not allow IPSEC connections behind a NAT. Open Regedit and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PolicyAgent Under the…
Setup MikroTik Wireguard For Road Warrior VPN
Add the WireGuard interface to the MikroTik using the Terminal. /interface wireguard add listen-port=13231 mtu=1420 name=TEST_WG Your Public and Private…